SuperOak now runs four collections. They share the same idea — a non-PVC hybrid wood plank over a waterproof core, finished through the Benchwick 3D-printing ecosystem and installed with an angle/tap click-lock — but they differ in thickness, plank format, wear rating and how many planks come in a carton.
SuperOak Lite — 9.5mm
The entry point. Same 3D-printed surface and waterproof construction as the rest of the range, in a thinner board.
- Thickness: 9.5mm
- Plank size: 48″ × 7.68″
- Wear rating: AC4
- Backing: 1.5mm cork foam
- Carton: 25.6 sq ft — 10 planks
- Best for: bedrooms, home offices, guest rooms, rental turnarounds
SuperOak Select — 12mm
The core of the range: a 12mm board with a real wood veneer under the printed surface.
- Thickness: 12mm
- Plank size: 48″ × 7.68″
- Wear rating: AC5
- Surface: real wood veneer with 3D-printed grain
- Backing: 1.5mm IXPE foam
- Carton: 20.56 sq ft — 8 planks
- Best for: living rooms, dining rooms, whole-home installations
SuperOak Plus — 12mm XL
The wide, long board. Fewer seams across a room and a longer grain run per plank.
- Thickness: 12mm
- Plank size: 72.7″ × 9.8″
- Wear rating: AC5
- Edge: painted bevel
- Carton: 29.87 sq ft — 6 planks
- Best for: open-plan living areas, luxury homes, light commercial
SuperOak Elite — 10mm, now on pre-order
The newest line and the largest format we make: 9″ wide by a full 60″ long, finished entirely through 3D printing with no repeating plank in a colourway.
- Thickness: 10mm
- Plank size: 9″ × 60″
- Surface: 3D printed — 30 non-repeating planks per colourway
- Water resistance: 500-hour immersion tested
- Edge: painted bevel
- Carton: 22.5 sq ft — 6 planks
- Best for: large open spaces where you want the fewest possible seams
Side by side
| Lite | Select | Plus | Elite | |
|---|---|---|---|---|
| Thickness | 9.5mm | 12mm | 12mm | 10mm |
| Plank | 48″ × 7.68″ | 48″ × 7.68″ | 72.7″ × 9.8″ | 60″ × 9″ |
| Wear rating | AC4 | AC5 | AC5 | — |
| Sq ft / carton | 25.6 | 20.56 | 29.87 | 22.5 |
| Planks / carton | 10 | 8 | 6 | 6 |
| Colourways | 13 | 12 | 10 | 10 |
What every collection shares
- Non-PVC hybrid wood over a waterproof core
- 3D-printed surface with embossed-in-register texture — you feel the grain where you see it
- Angle/tap click-lock, floats over any hard subfloor, no glue and no nails
- Colour-matched Perfect-In-Trims mouldings
- Ships from our California and South Carolina warehouses
Still deciding? Order a cut sample from any Select colourway from $3, or contact us and we will point you at the right board for the room.