A phased flooring project spends most of its life in storage. The delivery arrives once, the first room is finished in a weekend, and the remaining cartons sit in a hallway, a garage or a spare bedroom for weeks while other trades come and go. The material is the same material; what changes is that nobody can remember, three weeks later, which stack was meant for the second bedroom.
This guide is for homeowners and designers keeping hybrid wood cartons on site between phases. It covers the small record that keeps a stored delivery attributable, the handling habits that make a later count possible, and the questions the record does not answer. It is editorial storage and recordkeeping guidance only: not an acclimation requirement, not an installation instruction, not a moisture or temperature specification and not a stacking tolerance.
Storage is an allocation problem before it is a physical one
Cartons are heavy, uniform and easy to move, which is exactly why they migrate. A stack left in a hallway gets shifted to let a door open, then shifted again for a delivery of something else, and by the third move the original split between rooms exists only in someone's memory.
The fix is not a stricter rule about where things may be put; it is a written allocation made at the moment the delivery is checked. Room, carton count and stack position, recorded together, survive a move because the next person can see that the stack they are shifting is the one reserved for the back bedroom. The published packing figures make the count checkable: the SuperOak Elite Coastal Sand Oak reference states a 9 by 60 inch plank at 10 mm total thickness, six planks and 22.5 square feet per carton, so a room's requirement can be compared with a stack without opening anything.
Name the stack, not just the room
"In the garage" is a location only until the garage is reorganised. "Stack B, against the north wall, twelve cartons" is a location that can be found after a reorganise, because it describes a position rather than a building. Add the date the stack was made, and a reader can tell whether a stack position is current or historical.
Where a stack is split, record the split rather than rewriting the original entry. Two dated lines showing twelve cartons becoming eight and four tell a story that a single corrected line erases, and the story is usually the answer to the question being asked.
Look at the stack when you count it
Count and condition belong in the same pass. Cartons stored for weeks can take on the marks of their storage: a damp corner, a crushed edge where something leaned against them, a wrap that has been cut and re-taped. Note how many cartons each observation covers, in the same plain form used at delivery.
Photograph the stack at each phase, with the position visible in frame. A photograph of a stack in a corner is evidence of a count and a condition on a date; a photograph of a single carton on a workbench is evidence of neither.
Keep one page that follows the material
The table below is a workable shape for a storage page. It is short because it has to be filled in during a project, not after one.
| Entry | What to write | What it settles later |
|---|---|---|
| Phase | Which room or stage the stack serves | Whether material was reserved or spare |
| Carton count | The count on the date of the entry | Whether a shortfall predates the move |
| Stack position | A described position, not a room name alone | Whether the stack can still be found |
| Condition | Quantity plus a plain description | Whether the marks came from storage |
| Sealed or opened | The convention applied, stated once | How much of the delivery was inspected |
Re-read the product documents at each phase
The product documents describe a product, and they are written for a condition that the site may or may not be providing. That is why the guidance is worth checking again when a stack has been waiting longer than expected, rather than only on delivery day.
The note cannot settle whether a particular storage condition is acceptable. It can state what the condition was, for how long, and what was observed — which is precisely the information needed to ask the question properly, and the difference between a conversation about this delivery and a conversation about flooring in general.
Plan the end of storage, not only the start
A stack that is never formally closed is a stack that lingers. When a phase finishes, write the closing count: what was used, what remains, and where the remainder now sits. That single line is what turns surplus into a spare reserve with a purpose, and it is the line most often missing when a project ends with eight cartons in a garage and no idea whether they belong to the floor that was installed.
Frequently asked questions
How much space does a stored delivery need?
Enough that the cartons can be counted and inspected without moving the whole stack, which usually means keeping a walkway along one side. A delivery pushed into a corner is a delivery that will be counted once and then trusted for months. The record should name the stack position as well as the room, so a later phase can find it without searching.
Should cartons stay sealed between phases?
Sealed cartons are easier to identify, easier to move and easier to return if a line proves surplus; open cartons are easier to inspect but harder to attribute to a room later. Whichever convention is chosen, write it down once and apply it to every phase, because a mixed convention makes the count unreadable.
What belongs in the storage note?
The carton count per room, the stack position, the date the stack was made, the condition observed at that date and who moved it last. Those five entries answer almost every question that arrives later, including the one about whether a shortfall existed before or after the material was moved.
Does storage change what the product documents say?
It can, and that is why the documents are checked again at each phase rather than once at delivery. A storage condition that seemed fine for a fortnight may not match the guidance for a longer wait, and the published guidance for the exact product is the authority, not the note. The note records what was done; the documents state what is expected.


